Specs that keep your equipment moving.- Home
- Lifting & Material Handling
- Forklift
- Hyster H190HD
Forklift · Hyster
Hyster H190HD Specs
Quick-reference specifications for the Hyster H190HD forklift, taken from the manufacturer’s spec sheet.
- Capacity, rated
- 19,000 lb8700 kg
- Gradeability, 1 mph RL / NL
- 51 / 32 %
Performance 15 specs
| Capacity, rated | 19,000 lb (8700 kg) |
|---|---|
| Load center | 24.0 in (600 mm) |
| Tilt angle, standard mast forward / backward | 15 / 12 Deg. ° |
| Stability (Comply with ANSI?) | YES |
| Travel speed RL / NL | 17.8 / 18.9 mph (28.6 / 30.4 km/h) |
| Lift speed, standard mast RL / NL | 95 / 144 ft/min (.48 / .73 m/s) |
| Lowering, standard mast RL / NL | 98 / 95 ft/min (.49 / .48 m/s) |
| Gradeability, 1 mph RL / NL | 51 / 32 % |
| Size of tires, drive (front) | 10.00-20 16PLY |
| Size of tires, steer (rear) | 10.00-20 16PLY |
| Brakes, method of control, service / parking | air / spring |
| Brakes, method of operation, service / parking | foot / pull button |
| Governed speed NL | 2500 RPM |
| Clutch type, powershift | Torque Converter |
| Gear change type | MONOTROL |
Dimensions 9 specs
| Tire type, front / rear | Pneumatic |
|---|---|
| Length to face of forks | 169 in (4292 mm) |
| Width, standard tires | 98.03 in (2490 mm) |
| Height, standard mast lowered | 165 in (4178 mm) |
| Height, std. mast extended with / without LBE | 270 in (6846 mm) |
| Length, center drive axle to face of forks | 28.54 in (725 mm) |
| Wheelbase | 106.3 in (2700 mm) |
| Ground clearance, lowest point NL | 10.24 in (261 mm) |
| Ground clearance, center wheelbase NL | 11.6 in (295 mm) |
Power / Engine 4 specs
| Engine / Power type | Diesel |
|---|---|
| Battery, volts / cold cranking amps | 24 / 550 V (amps) |
| Engine, make-model | Cummins QSB6.7-155 |
| Transmission type | Powershift |