Specs that keep your equipment moving.- Home
- Lifting & Material Handling
- Forklift
- Hyster S45XM
Forklift · Hyster
Hyster S45XM Specs
Quick-reference specifications for the Hyster S45XM forklift, taken from the manufacturer’s spec sheet.
- Capacity,rated
- 4,500 lb2,041 kg
Performance 15 specs
| Capacity,rated | 4,500 lb (2,041 kg) |
|---|---|
| Load center | 24 in (610 mm) |
| Tilt angle,forward / backward | 5 / 8 Deg.° |
| Turning radius,minimum outside | 77.8 in (1,976 mm) |
| Stability (Comply with ANSI?) | YES |
| Travel speed,NL / RL | 10.9 / 11.1 mph (17.5 / 17.9 km/h) |
| Lift speed,standard mast NL / RL (Gas) | 136.0 / 126.0 ft/min (0.69 / 0.64 m/s) |
| Lift speed,standard mast NL / RL (LPG) | 133.0 / 118.0 ft/min (0.68 / 0.60 m/s) |
| Lowering,standard mast NL / RL | 82.8 / 98.6 ft/min (0.42 / 0.50 m/s) |
| Drawbar pull,Powershift,1 mph NL / RL | 6,120 / 5,270 lb (27.2 / 23.4 kN) |
| Brakes,method of control,service / parking | Hydraulic / Mechanical |
| Brakes,method of operation,service / parking | Foot / Hand |
| Governed speed,NL | 2,800 rpm |
| Clutch type (Powershift) | Torque Converter |
| Gear change type (Powershift) | MONOTROLPedal |
Dimensions 9 specs
| Tire type,front / rear | Cushion / Cushion |
|---|---|
| Limited free-lift (TOF) | 5.5 in (140 mm) |
| Length to face of forks | 88.0 in (2,235 mm) |
| Width,standard tires | 42.0 in (1,067 mm) |
| Height,standard mast lowered | 84.0 in (2,134 mm) |
| Center of wheel to face of forks | 14.8 in (376 mm) |
| Wheelbase | 56.3 in (1,430 mm) |
| Tread,center of tires front / rear | 35.0 / 36.7 in (889 / 932 mm) |
| Ground clearance,lowest point – NL | 3.6 in (91 mm) |
Weight 3 specs
| Axle loading,static,front / rear – RL | 11,011 / 1,702 lb (4 995 / 772 kg) |
|---|---|
| Size of tires,drive (front) | 21.0 x 7.0 x 15.0 |
| Size of tires,steer (rear) | 16.0 x 5.0 x 10.5 |
Power / Engine 2 specs
| Power type | Gas / LPG |
|---|---|
| Transmission type | Powershift |