Specs that keep your equipment moving.- Home
- Lifting & Material Handling
- Telehandler
- 5K Telehandler
- Genie GTH-6025ER
Telehandler · Genie
Genie GTH-6025ER Specs
Quick-reference specifications for the Genie GTH-6025ER telehandler, taken from the manufacturer’s spec sheet.
- Lift capacity at maximum height
- 4,409 lb2,000 kg
- Weight
- 45,084 lb20,450 kg
Performance 11 specs
| Lifting capacity maximum | 13,228 lb (6,000 kg) |
|---|---|
| Lift capacity at maximum height | 4,409 lb (2,000 kg) |
| Lift capacity at maximum reach | 551 lb (250 kg) |
| Forward reach maximum | 70 ft 5 in (21.46 m) |
| Reach at maximum height | 14 ft 1 in (4.25 m) |
| Inside/outside turning radius | 9 ft /15 ft 11 in (2.75 m/4.85 m) |
| Drive speed max. | 18.6 mph (30 km/h) |
| Fork-holder plate rotation | 124° |
| Chassis levelling on both axles | +/- 7.5° |
| Vibration level hand-arm system | <8 ft 2 in/s² (<2.5 m/s²) |
| Vibration level whole body | 1 ft 1 in/s² (0.32 m/s²) |
Dimensions 15 specs
| Lifting height maximum | 81 ft 6 in (24.84 m) |
|---|---|
| Height | 10 ft 4 in (3.15 m) |
| Height at steering wheel | 7 ft 4 in (2.23 m) |
| Width | 8 ft 1 in (2.47 m) |
| Cab width | 3 ft (93 cm) |
| Track | 6 ft 8 in (2.02 m) |
| Wheelbase | 11 ft 6 in (3.50 m) |
| Length at stabilisers | 20 ft (6.09 m) |
| Length at fork-holder plate | 27 ft 7 in (8.40 m) |
| Ground clearance | 1 ft 9 in (54 cm) |
| Overall width, stabilisers extended | 16 ft 6 in (5.04 m) |
| Side rear overhang | 10 ft 9 in (3.28 m) |
| Side front overhang | 16 ft 10 in (5.12 m) |
| Overall length | 31 ft 6 in (9.60 m) |
| Overall front overhang | 20 ft 9 in (6.32 m) |
Weight 1 spec
| Weight | 45,084 lb (20,450 kg) |
|---|
Power / Engine 2 specs
| Fuel | 32 gal (145 L) |
|---|---|
| Engine oil | 4 gal (18 L) |
Hydraulics / Fluids 1 spec
| Hydraulic oil | 50.6 gal (230 L) |
|---|