Telehandler · JCB

JCB 525-60 AGRI Specs

Quick-reference specifications for the JCB 525-60 AGRI telehandler, taken from the manufacturer’s spec sheet.

Download Spec Sheet (PDF)View PDF

Maximum lift capacity: 2500 kg
Reach at maximum lift height: 0.4 m
Maximum forward reach (to front of carriage): 3.3 m
Weight: 5520 kg

Performance 8 specs

Maximum lift capacity	2500 kg
Lift capacity to full height	1750 kg
Lift capacity at full reach	800 kg
Reach at maximum lift height	0.4 m
Maximum forward reach (to front of carriage)	3.3 m
Noise at the operator station (LpA)	76 dB
Noise emission from the machine (LWA)	103 dB
Hand-arm vibration (m/s)	<2.5

Dimensions 14 specs

Overall height	1.97 m
Overall width (over tyres)	1.84 m
Inside width of cab	0.88 m
Front track	1.52 m
Wheelbase	2.39 m
Overall Length to front tyres	3.5 m
Overall length to front carriage	4 m
Ground clearance	0.27 m
Front wheel centre to carriage	1.02 m
Outside turn radius (over tyres)	3.4 m
Carriage roll back angle	11 degrees
Carriage dump angle	24 degrees
Tyres	12.5/80R18 Camso IMP
Lift height	6 m

Weight 1 spec

Weight	5520 kg

Power / Engine 8 specs

Displacement	2.5 ltr
No. of cylinders	4
Power @ 2200rpm	74 hp (55 kW)
Torque @ 1500rpm	221 lb/ft (300 Nm)
Transmission – Low range Forward	12 kph
Transmission – Low range Reverse	12 kph
Transmission – Hi-range Forward	25 kph
Transmission – Hi-range Reverse	25 kph

Hydraulics / Fluids 11 specs

Operating system pressure	235 bar
Flow at system pressure	80 ltr/min
Hydraulic cycle times – Boom raise	7.6 Seconds
Hydraulic cycle times – Boom lower	5.3 Seconds
Hydraulic cycle times – Boom Extend	7.5 Seconds
Hydraulic cycle times – Retract	3.7 Seconds
Hydraulic cycle times – Bucket dump	1.9 Seconds
Hydraulic cycle times – Bucket crowd	2.9 Seconds
Electrical System – System voltage	12 Volt
Service Fill Capacities – Hydraulic tank	49 litres
Service Fill Capacities – Fuel tank	75 litres

JCB 525-60 AGRI spec sheet (PDF)

Open in new tab

jcb-525-60-agri