1. Home
  2. Lifting & Material Handling
  3. Forklift
  4. Hyster H155FT

Forklift · Hyster

Hyster H155FT Specs

Quick-reference specifications for the Hyster H155FT forklift, from the manufacturer’s spec sheet and published specifications.

Operating Weight (Diesel)
20,902 lb9,481 kg
Gradeability (Diesel)
33%

Performance 11 specs

Kubota 3.8L EPA Certified Tier 4 (i) Diesel Kubota 3.8 L EPA Certified Tier 4 (i) Diesel
Elec. Controlled Powershift 2F / 2R
Load Capacity 15,500 lb (7,030 kg)
Load Center 24 in (610 mm)
Max Fork Height 17.8 ft (5.4 m)
Max Speed (Diesel) 13.8 mph (22.2 kph)
Max Speed (LPG) 15.6 mph (25.1 kph)
Gradeability (Diesel) 33%
Gradeability (LPG) 27%
Lift Speed 96-106 ft/min (29-32 m/min)
Lower Speed 81-85 ft/min (25-26 m/min)

Dimensions 6 specs

Length to Fork Face 12.1 ft (3.69 m)
Ground Clearance 10.0 in (25.4 cm)
Right Angle Stack 13.1 ft (3.99 m)
Max Fork Spread 73.9 in (187.7 cm)
Step Height 12.6 in (321 mm)
Height to Top of Overhead Guard 8.4 ft (2.56 m)

Weight 4 specs

Operating Weight (Diesel) 20,902 lb (9,481 kg)
Operating Weight (LPG) 20,792 lb (9,431 kg)
Axle Load – Front (Diesel) 9,215 lb (4,180 kg)
Axle Load – Rear (Diesel) 11,687 lb (5,301 kg)

Power / Engine 10 specs

Engine Type (Diesel) Cummins 4.5 L, 4 cylinders
Power (Diesel) 105 hp (78.3 kW) @ 2200 rpm
Torque (Diesel) 275 lb ft (372.9 Nm) @ 1600 rpm
Engine Type (LPG) GM 4.3 L, 6 cylinders
Power (LPG) 96 hp (71.6 kW) @ 2400 rpm
Torque (LPG) 210 lb ft (284.7 Nm) @ 2400 rpm
Engine Type (Gas) GM 4.3 L, 6 cylinders
Power (Gas) 96.6 hp (72 kW) @ 2400 rpm
Torque (Gas) 210 lb ft (284.7 Nm) @ 2400 rpm
Fuel Capacity 19.7 gal (74.6 L)

Hydraulics / Fluids 4 specs

Hydraulic Tank Capacity 18.9 gal (71.5 L)
Hydraulic System Relief Valve Pressure 2,250 psi
Mast Tilt Forward 5 degrees
Mast Tilt Rear 10 degrees

Hyster H155FT spec sheet (PDF)

Open in new tab