Specs that keep your equipment moving.- Home
- Lifting & Material Handling
- Forklift
- Caterpillar EP25K PAC
Forklift · Caterpillar
Caterpillar EP25K PAC Specs
Quick-reference specifications for the Caterpillar EP25K PAC forklift, taken from the manufacturer’s spec sheet.
- Gradeability, with/without load
- 16.5 / 27.9 %
Performance 13 specs
| Load capacity | 2500 kg |
|---|---|
| Load centre distance | 500 mm |
| Mast tilt, forwards/backwards | 6 / 8 degrees |
| Travel speed, with/without load | 20.0 / 20.0 km/h |
| Lifting speed, with/without load | 0.50 / 0.65 m/s |
| Lowering speed, with/without load | 0.50 / 0.50 m/s |
| Rated drawbar pull, with/without load | 8400 / 8900 N |
| Maximum drawbar pull, with/without load (5 min short duty) | 12200 / 12700 N |
| Gradeability, with/without load | 16.5 / 27.9 % |
| Maximum gradeability, with/without load | 18.5 / 31.1 % |
| Acceleration time (10 metres) with/without load | 4.3 / 3.7 s |
| Type of drive control | MOSFET |
| Noise level, value at operator’s ear (EN 12053) | 185 dB (A) |
Dimensions 16 specs
| Wheelbase | 1520 mm |
|---|---|
| Tyre dimensions, front | 23 x 9 – 10 |
| Tyre dimensions, rear | 18 x 7 – 8 |
| Track width (centre of tyres), front | 990 mm |
| Track width (centre of tyres), rear | 898 mm |
| Height to top of overhead guard | 2142 mm |
| Seat height | 1105 mm |
| Overall length | 3344 mm |
| Length to fork face (includes fork thickness) | 2274 mm |
| Overall width | 1190 mm |
| Fork dimensions (thickness, width, length) | 40 x 110 x 1070 mm |
| Fork carriage to DIN 15 173 A/B/no | 2A |
| Fork carriage width | 1000 mm |
| Working aisle width with 1000 x1200 mm pallets, crosswise | 3596 mm |
| Working aisle width with 800 x1200 mm pallets, crosswise | 3396 mm |
| Turning circle radius | 1970 mm |
Power / Engine 4 specs
| Lift motor output at 15% duty factor | 20.9 kW |
|---|---|
| Battery to DIN 43 531/35/36 A/B/C/no | 43.536A |
| Battery voltage/capacity at 5-hour discharge | 80 / 600 V/Ah |
| Battery weight | 1385 kg |
Hydraulics / Fluids 2 specs
| Service brakes (mechanical/hydraulic/electric/pneumatic) | Hydraulic |
|---|---|
| Maximum operating pressure for attachments | 185 bar |