Specs that keep your equipment moving.- Home
- Lifting & Material Handling
- Telehandler
- 10K Telehandler
- Lull 10K-54
10K Telehandler · Lull
Lull 10K-54 Specs
Quick-reference specifications for the Lull 10K-54 telehandler, compiled from published specifications.
- Rated Capacity
- 10,000 lb4,536 kg
- Maximum Lift Height
- 54 ft16.5 m
- Operating Weight (without carriage and forks)
- 31,350 lb14,220 kg
Performance 12 specs
| Rated Capacity | 10,000 lb (4,536 kg) |
|---|---|
| Maximum Lift Height | 54 ft (16.5 m) |
| Frame Leveling | 10 degrees |
| Lift Speed – Up (boom retracted, no load) | 15.6 sec |
| Lift Speed – Down (boom retracted, no load) | 14.6 sec |
| Boom Speed – Extend (no load) | 15.2 sec |
| Boom Speed – Retract (no load) | 11.3 sec |
| Travel Speed Forward (max) | 22 mph (35 kmph) |
| Drawbar Pull (loaded) | 21,700 lb (9,843 kg) |
| Forward Reach | 45 ft (13.7 m) |
| Horizontal Load Placement | 80 in (2.0 m) |
| Outside Turning Radius | 170 in (4.32 m) |
Dimensions 5 specs
| Length (less forks) | 246 in (6.24 m) |
|---|---|
| Width | 101 in (2.57 m) |
| Height | 97 in (2.46 m) |
| Wheelbase | 124 in (3.14 m) |
| Ground Clearance | 16 in (406 mm) |
Weight 2 specs
| Operating Weight (without carriage and forks) | 31,350 lb (14,220 kg) |
|---|---|
| Operating Weight (with 50 in. carriage and forks) | 32,697 lb (14,931 kg) |
Power / Engine 8 specs
| Engine Make/Model | John Deere 4045TF |
|---|---|
| Fuel Type | No. 2 Diesel |
| Number of Cylinders | 4 |
| Displacement | 276 cu in (4.5 L) |
| Rated Speed | 2,500 rpm |
| Fuel Tank Capacity | 36 gal (136 L) |
| Electrical System Voltage | 12 V |
| Alternator Output | 95 amp |
Hydraulics / Fluids 3 specs
| Hydraulic System Capacity | 33.5 gal (127 L) |
|---|---|
| Transmission Speeds | 4-speed forward / 3-speed reverse |
| Drive | Full-time planetary 4-wheel drive |