1. Home
  2. Lifting & Material Handling
  3. Forklift
  4. Doosan DV180S-7

Forklift · Doosan

Doosan DV180S-7 Specs

Quick-reference specifications for the Doosan DV180S-7 forklift, taken from the manufacturer’s spec sheet.

Capacity at rated load center
40,000 lb18,000 kg
Gradeability at 1.6km/h, loaded
35.6 %

Performance 12 specs

Capacity at rated load center 40,000 lb (18,000 kg)
Tilt of mast forward/backward 10/9 deg
Minimum outside turning radius 201.6 in (5,120 mm)
Speed – travel, loaded/unloaded 24.2/26.1 mph (39/42 km/h)
Speed – lift, loaded/unloaded 74.8/80.7 fpm (380/410 mm/s)
Speed – lowering, loaded/unloaded 78.7/68.9 fpm (400/350 mm/s)
Drawbar pull at 1.6km/h, loaded 32,298 lb (14,650 kg)
Gradeability at 1.6km/h, loaded 35.6 %
Tires – size, front single 12.00 R20
Tires – size, rear 12.00 R20
Brake – service Disc
Brake – parking Mechanical

Dimensions 14 specs

Load center distance 48 in (1,200 mm)
Tire p
Lift with STD two-stage mast – maximum fork height 137.8 in (3,500 mm)
Lift with STD two-stage mast – free lift 0
Forks – thickness x width x length 3.94×9.84×94.49 in (100x250x2,400 mm)
Forks – forkspacing (minimum x maximum) 27.95×94.25 in (710×2,394 mm)
Overall dimensions – length to fork face 220.3 in (5,595 mm)
Overall dimensions – width 100 in (2,540 mm)
Overall dimensions – mast lowered height 137.2 in (3,485 mm)
Overall dimensions – mast extended height 204.9 in (5,205 mm)
Overall dimensions – cab Height 115.4 in (2,930 mm)
Overall dimensions – seat height 70.9 in (1,800 mm)
Ground clearance loaded, at the lowest point 8.3 in (210 mm)
Ground clearance loaded, at center of wheelbase 12.8 in (325 mm)

Weight 3 specs

Total weight unloaded 58,202 lb (26,400 kg)
Axle load with loaded, front/rear 90,853/7,033 lb (41,210/3,190 kg)
Axle load without loaded, front/rear 27,888/30,314 lb (12,650/13,750 kg)

Power / Engine 7 specs

Power type Diesel
Engine – manufacturer/model Doosan / DL08P
Engine – max. torque 853 lb-ft/1,300 rpm (118 kg-m/1,300 rpm)
Engine – cycle/cylinders/displacement 4/6/7,640 cc
Transmission – manufacurer/model ZF / 4WG211
Transmission Type Full Autoshift
Driveaxle Kessler D81

Hydraulics / Fluids 2 specs

Fuel Tank 300 l
Operating pressure system/attachment 3,408/2,683 psi (235/185 bar)

Doosan DV180S-7 spec sheet (PDF)

Open in new tab