1. Home
  2. Lifting & Material Handling
  3. Forklift
  4. Caterpillar DP150

Forklift · Caterpillar

Caterpillar DP150 Specs

Quick-reference specifications for the Caterpillar DP150 forklift, taken from the manufacturer’s spec sheet.

Capacity at rated load center
33,000 lb15,000 kg
Gradeability loaded at 1 mph (1.6 km)
19 %

Performance 11 specs

Capacity at rated load center 33,000 lb (15,000 kg)
Minimum outside turning radius 179.1 in (4550 mm)
Speeds travel speed loaded / empty 12.8/20.5 mph (20.5/33.0 km/h)
Speeds lift speed loaded / empty 55/61 fpm (.28/.31 m/s)
Speeds lowering speed loaded / empty 75/82 fpm (.38/.42 m/s)
Gradeability loaded at 1 mph (1.6 km) 19 %
Gradeability maximum loaded / empty 31/32 %
Axle load with rated load front / rear 65,320 / 6840 lb (29,660 / 3100 kg)
Brakes service air over hydraulic-foot
Brakes parking mechanical-hand
Noise level mean value at operator’s ear Leq 89.5 dB (A)

Dimensions 19 specs

Tire type pneumatic
Lift with standard two-stage mast maximum fork height 133 in (3300 mm)
Lift with standard two-stage mast free fork height 0 in (0 mm)
Fork spacing out-to-out minimum / maximum 41.5/89.0 in (1055/2260 mm)
Overall dimensions length to fork face 190.2 in (4830 mm)
Overall dimensions width standard dual drive tires 102.4 in (2600 mm)
Overall dimensions height with lowered mast 137.2 in (3485 mm)
Overall dimensions height seat height 70.5 in (1790 mm)
Overall dimensions height to top of overhead guard 113.2 in (2875 mm)
Overall dimensions height with extended mast 205.9 in (5230 mm)
Tire size front, standard dual drive tires 12.00 x 20-18PR in
Tire size front, optional dual drive tires N/A in
Tire size rear 12.00 x 20-18PR in
Wheelbase 122 in (3100 mm)
Tread width front, standard dual drive tires 75 in (1905 mm)
Tread width front, optional dual drive tires N/A in (N/A mm)
Tread width rear tires 74.4 in (1890 mm)
Ground clearance at lowest point @ mast 10.2 in (260 mm)
Ground clearance at center of wheelbase 14.9 in (380 mm)

Weight 1 spec

Axle load without load front / rear 17,510 / 21,650 lb (7940 / 9820 kg)

Power / Engine 5 specs

Engine manufacturer and model Mitsubishi 6D16
Engine continuous output S.A.E. gross 131 HP (98 kW)
Engine maximum torque S.A.E. gross 347 lb-ft (48 kg-m)
Engine cylinder / displacement 6/460 cu in (6/7545 cm3)
Transmission type automatic powershift

Hydraulics / Fluids 1 spec

Relief pressure for attachments 2465 psi (170 bar)

Caterpillar DP150 spec sheet (PDF)

Open in new tab