Equipment Spec Sheet
Quick-reference specifications for the JLG 3248RS. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
| to pull out. | 25% Gradeability |
|---|---|
| Platform Capacity | 500 lb (227 kg) |
| Capacity on Deck Extension | 250 lb (113 kg) |
| Gradeability | 25% |
| Turning Radius (Inside) | 2 ft (.6 m) |
| Turning Radius (Outside) 7 ft | 3 in. (2.2 m) |
| Platform Railing Height 3 ft | 4.2 in. (1.016 m) |
|---|---|
| Overall Height 6 ft | 7.4 in. (2.02 m) |
| Platform Dimensions 6 ft x 2 ft | 3 in. (1.82 m x .68 m) |
| Overall Machine Length 6 ft | 9.4 in. (2.07 m) |
| Overall Machine Width | 32 in. (.812 m) |
| Wheelbase | 55 in. (1.39 m) |
| Ground Clearance (Midframe) | 3.1 in. (7.87 cm) |
| Maximum Drive Height | 19 ft (5.8 m) |
| Weight | 3,450 lb (1,565 kg) |
|---|---|
| Batteries 4 x 6V, | 220 AH |
| Charger | 25 amp |
| Drive | 24V DC |
| Standard Features | 110V-AC Receptacle in Platform |
| Optional | 25 Amp Automatic SCR Charger |
| Drive Speed, Lowered | 2.5 mph (4 km/h) |
|---|---|
| Tire Size (Solid, Non-Marking) 12.5 x 4 in. (3.18 x | 10 cm) |
| JLG Industries, Inc. | 1 JLG Drive |
| Ground Bearing Pressure | 143 psi (10.05 kg/cm2 ) |
|---|---|
| Pump | 3.2 cc/rev @ 2,300 psi (3.2 cc/rev @178 kg/cm2) |
| Hydraulic Reservoir | 1.32 gal (5 L) |
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
Equipment Spec Sheet
Quick-reference specifications for the Haulotte 45 XA. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
| Working height | 51 ft |
|---|---|
| Platform height | 45 ft |
| Horizontal outreach (from centerline) | 27 ft |
| Horizontal outreach (from edge of footpad) | 21 ft |
| Up and over height 20 ft | 9 in |
| Lift capacity | 500 lb |
| Jib – length 4 ft | 3 in |
| Jib – Vertical motion | 150° (+70 / -80) |
| Gradeability | 45% |
| Turning radius – inside (2WS) 12 ft | 6 in |
| A – Length – stowed 18 ft | 2 in |
|---|---|
| B – Width stowed 5 ft | 6 in |
| C – Height stowed 6 ft | 7 in |
| D – Wheelbase 8 ft | 9 in |
| E – Ground clearance | 6 in |
| F x G – Platform size 5 ft x 2 ft | 6 in |
| LIGHT-WEIGHT SELF-PROPELLED BOOMS 45 XA – | 55 XA |
|---|---|
| Access like never before High performance | 4WD and light |
| Batteries 4 x 6V | 245 Amp-hr |
| Weight | 4,900 lb |
| Optimum performance | 110V GFI protected power to |
|---|---|
| Drive speed | 3.5 mph (max) |
| Tire size 26 x | 12 Bar lug |
| Engine | 22 hp gas Kawasaki |
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
Scissor Lift Spec Sheet
Quick-reference specifications for the GS-2646 AV35. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
No structured data could be extracted automatically. Review the PDF and populate this page manually.
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
Telehandler Spec Sheet
Quick-reference specifications for the Gradall 544D. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
| Rated Capacity At | 24 in. (610 mm) load center, |
|---|---|
| Maximum Lift Height | 55 ft. (16.8 m) |
| Frame Leveling | 8 degrees |
| Lift Speed (boom retracted) Empty, | 110 f.p.m. (34 m/min); |
| Boom Speed Extend | 130 f.p.m. (40 m/min) |
| Travel Speeds Forward and Reverse 4WD-2WD | 6.5-19 mph (10.5-30.6 km/hr) |
| Drawbar Pull Loaded | 18,400 lb. (8345 kg) |
| Retract | 130 f.p.m. (40 m/min) |
|---|---|
| Operating Weight With | 48″ (1.2 m) carriage and forks, |
| Attachments | 544D |
| requires all rough terrain forklift operators to be trained according to OSHA | 29 |
| Replaces Form No. | 10009 |
| Tires 14 | 00x 24 – 12PR, G2 type, 623 lb. |
|---|---|
| Hydraulic power steering with manual backup. Rear wheel steering, | 90° pivot |
| Light Group Consists of | 2 cab-mounted headlights, 1 |
| Hydrostatic Drive | 6300 PSI (43,439 kpa) closed loop with |
| Single-section gear pump. | 40 gal. (151.4 L) system capacity. |
|---|---|
| piston pump and motors. | 8 micron suction filter for charge pump. |
| All hydraulic connections ORS and Code | 62 O-ring flanges. |
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
Telehandler Spec Sheet
Quick-reference specifications for the Gradall 534D-6. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
No structured data could be extracted automatically. Review the PDF and populate this page manually.
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
BHE Specs 2025 Design & Developed by Themespride