LULL 1044C-54 Series II Spec Sheet

LULL 1044C-54 Series II Spec Sheet

Telehandler Spec Sheet

LULL 1044C-54 Series II Spec Sheet

Quick-reference specifications for the LULL 1044C-54 Series II. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.

Rated Capacity: 10,000 lb (4,536 kg) Maximum Lift Height: 54 ft (16.5 m) Forward Reach: 45 ft (13.7 m) Operating Weight With: 50 in. Carriage and Forks

BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.

Performance

Light Material Bucket1.25 cu yd (0.95 m3) capacity
Rated Capacity10,000 lb (4,536 kg)
Maximum Lift Height54 ft (16.5 m)
Frame Leveling10 degrees
Lift Speed (boom retracted, no load) Up15.6 sec
Boom Speed (no load) Extend15.2 sec
Travel Speed Forward22 mph (35 kmph) max.
Drawbar Pull (loaded)21,700 lb (9,843 kg)
Forward Reach45 ft (13.7 m)
Outside Turning Radius170 in. (4.32 m)

Dimensions

Length (less forks)246 in. (6.24 m)
Width101 in. (2.57 m)
Height97 in. (2.46 m)
Wheelbase124 in. (3.14 m)
Ground Clearance16 in. (406 mm)

Weights & Electrical

Retract11.3 sec
Operating Weight With50 in. Carriage and Forks
Horizontal Load Placement80 in. (2.0 m)
Displacement276 cu in (4.5 L)
Electrical System Voltage12V
Alternator95 amp Battery: 925 cold cranking amps at 0°F
Maximum Reach from Front Tires to24 in. (609 mm) Load Center
TRANSACTION80 in. (203 cm)

Powertrain & Systems

Fuel No.2 Diesel
Modulated powershift. 4-speed forward and3-speed reverse.
Axles Full-time planetary4-wheel drive.
Tires Standard400/75-28
Steering 4-wheel circle, 4-wheel crab,2-wheel front.
JLG Industries, Inc.1 JLG Drive

Hydraulics & Capacities

Hydraulic Fork Position Carriage50 in. (1.3 m)
Fuel Tank36 gal (136 L)
Load sensing dual gear pumps.33.5 gal (127 L) system capacity.

Flipbook / PDF Viewer

If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.

[wpcode id="2052"]