Equipment Spec Sheet
JLG 1932E2 Spec Sheet
Quick-reference specifications for the JLG 1932E2. Includes extracted performance, dimensions, capacities, and other details found in the source PDF.
Platform Capacity 1532E2 -: 600 lb (270 kg)
Platform Height (Elevated): 1532E2 -15 ft (4.5 m)
Machine Weight 1532E2 – approx.: 2940 lb (1334 kg)
Manual Platform Extension Capacity All Models – 250 lb. (120 kg) -: 1 person
BHESPECS note: Specs can vary by configuration, serial range, and market. Always confirm against the machine data plate and the source PDF.
Performance
| Travel Speed | 1532E2/1932E2 |
|---|---|
| Gradeability All Models – | 25% |
| Inside Turning Radius 1532E2/1932E2 – | 19 in (0.50 m) |
| Platform Capacity 1532E2 – | 600 lb (270 kg) |
| Manual Platform Extension Capacity All Models – 250 lb. (120 kg) – | 1 person |
| Platform Height (Elevated) | 1532E2 -15 ft (4.5 m) |
| Platform Height (Stowed) 1532E2 – | 37.5 in (1.0 m) |
| Specification Only) When the platform is loaded to | 120% of its rated capacity, |
Dimensions
| Platform Size 1532E2/1932E2 – 31 in x 64 in (0.8 m x | 1.6 m) |
|---|---|
| Wheelbase 1532E2/1932E2 – | 52.25 in (1.3 m) |
| Machine Length | 1532E2/1932E2 -68.5 in (1.7 m) |
| Machine Width 1532E2/1932E2 – | 31.75 in (0.8 m) |
Weights & Electrical
| Electrical Schematic – Proportional Control (Sheet 1 of | 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6 |
|---|---|
| Electrical Schematic – Proportional Control (Sheet 2 of | 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7 |
| Battery Charger | 20 Amp SCR |
| Japanese Specification 100/200 Volts AC – | 50/60 Hz input |
| Machine Weight 1532E2 – approx. | 2940 lb (1334 kg) |
| front center of the machine frame on all models. | 1.7 |
Powertrain & Systems
| Tires – | 2032E2/2632E2/2646E2/3246E2 |
|---|---|
| Drive Motors 1532E2/1932E2 – | 7.7 in3 (126 cm3) displacement |
| Maximum Tire Load 1532E2 – | 1,200 lb (545 kg) |
Hydraulics & Capacities
| Hydraulic Schematic – Proportional Control (Sheet 1 of | 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10 |
|---|---|
| Hydraulic Schematic – Proportional Control (Sheet 2 of | 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11 |
| Hydraulic System (Including Tank) 1532E2/1932E2 – Approximately | 4.0 gallons (15.0 liters) |
| Maximum Bearing Pressure 1532E2 – | 93 psi (6.5 kg/cm2) |
| chemical stability for mobile hydraulic system ser- vice. JLG Industries recommends Mobilfluid | 424 |
| sive qualities, and being of extreme pressure type. (Timken OK | 40 pounds minimum.) |
Lubricants & Fluids
| Hydraulic Oil Tank | 1532E2/1932E2 |
|---|---|
| NOTE | Hydraulic oils must have anti-wear qualities at least to API Service Classification GL-3, and sufficient |
| hydraulic oil, which has an SAE viscosity of | 10W-30 |
| comparable viscosities. If use of hydraulic oil other than Mobilfluid | 424 is desired, contact JLG Indus- |
| Table | 1-2. Hydraulic Oil |
| Multipurpose Grease having a minimum dripping point of | 350° F. Excellent water resistance and adhe- |
| Mobilfluid 424 . SECTION | 1 – SPECIFICATIONS |
Flipbook / PDF Viewer
If the embed doesn’t show, use a WordPress Shortcode block for the pdf-embedder shortcode.
